Initial out of box setup

Port x5 (my network is isolated for new device setups) are for a Palo Alto with a default IP of 192.168.1.1

DHCP on these ports are

192.168.1.4 - 192.168.1.254

GW 192.168.1.3

You need to disable Zero Touch through SSH upon booting though Putty

Plug laptop into MGMT port with your static

Plug ethernet1/1 of Palo Alto into working network (mine is X5)

Log into MGMT Port 192.168.168.1

Set DNS servers

Delete Virtual Wires

Change 1/1 to Layer 3

Assign static to 1/1 (Just use the IP that pulled from DHCP)

Example: 192.168.1.69/24

Now set the Service Route Configuration (all of them) to 1/1

Add Virtual Router

default:

Router Settings: ehternet1/1

Static Routes:

Name: To-WAN (or whatever)

Destination: 0.0.0.0/0

Interface: ethernet1/1

Next Hop → IP Address: (Example Gateway) 192.168.1.2

Metric: 10

→ OK → OK

Make sure Interface1/1 is still on the default router

Commit

Device / Licenses / Retrieve

Dynamic Updates

Check Now

Download and install all updates